
无数据
1.Laboratory of Infrared Material and Devices, The Research Institute of Advanced Technologies, College of Information Science and Engineering, Ningbo University, Ningbo 315211, China
2.College of Information and Intelligence Engineering, Zhejiang Wanli University, Ningbo 315000, China
3.Department of Physics, Beijing Key Laboratory of Opto-Electronic Functional Materials & Micro-Nano Devices, Key Laboratory of Quantum State Construction and Manipulation (Ministry of Education), Renmin University of China, Beijing 100872, China
4.Optoelectronics Research Centre, University of Southampton, Southampton SO17 1BJ, United Kingdom
5.Deparment of Quantum Science and Technology, The Australia National University, Canberra, ACT 0200, Australia
Xunsi Wang (wangxunsi@nbu.edu.cn)
Rongping Wang (wangrongping@nbu.edu.cn)
Received:27 April 2025,
Revised:2025-09-30,
Accepted:13 October 2025,
Online First:02 March 2026,
Published:31 May 2026
Scan QR Code
Wang, X. G. et al. Breaking the mid-infrared interconnection barrier: a robust bonding for high-power optics based on liquid-like chalcogenide glass. Light: Science & Applications, 15, 1440-1450 (2026).
Wang, X. G. et al. Breaking the mid-infrared interconnection barrier: a robust bonding for high-power optics based on liquid-like chalcogenide glass. Light: Science & Applications, 15, 1440-1450 (2026). DOI: 10.1038/s41377-025-02098-0.
Achieving low-loss optical interfaces between high-refractive-index (
n
>
2) components is critical for mid-infrared photonic systems
yet hindered by the trade-off between refractive index matching
IR transparency and thermal stability. Here
we introduce a groundbreaking soluti
on—bonding the optical lenses and fibers with a liquid-like chalcogenide glass
which possesses an ultra-low glass transition temperature below room temperature
high refractive index and exceptional mid-infrared transparency. The basic performances of the liquid glass are characterized and proved by detailed viscosity distribution
mechanical shear and bonding tensile strength measurements. Most of all
the optical transmission and laser delivery of these bonded chalcogenide glass fiber devices demonstrate a significant improvement
with transmission efficiency increasing from 36% to 91%
and laser power delivery from several hundred mW rising to 14.5 W at a wavelength near 4 µm. Additionally
the system demonstrates long-term stability
maintaining performance over at least 3 months and more than 206 heating-cooling cycles when utilizing this liquid-like glass adhesive. This research not only addresses the challenge of bonding mid-infrared optical components but also holds immense promise for advancing integrated mid-infrared optics applications
including spectroscopy
sensing
and imaging.
Armand, R. et al. Mid-infrared integrated silicon-germanium ring resonator with high Q-factor. APL Photonics 8 , 071301 (2023)..
Fang, B. et al. Bidirectional mid-infrared communications between two identical macroscopic graphene fibres. Nat. Commun. 11 , 6368 (2020)..
Sato, S. I. et al. High power, high intensity CO infrared laser transmission through As 2 S 3 glass fibers. Appl. Phys. Lett. 48 , 960–962 (1986)..
Troles, J. et al. Optical limiting behavior of infrared chalcogenide glasses. J. Optoelectron. Adv. Mater. 4 , 729–735 (2002)..
Spinelli, P., Verschuuren, M. A. & Polman, A. Broadban d omnidirectional antireflection coating based on subwavelength surface Mie resonators. Nat. Commun. 3 , 692 (2012)..
Yang, J. et al. Design and fabrication of broadband ultralow reflectivity black Si surfaces by laser micro/nanoprocessing. Light Sci. Appl. 3 , e185 (2014)..
Sincore, A. et al. High power single-mode delivery of mid-infrared sources through chalcogenide fiber. Opt. Express 26 , 7313–7323 (2018)..
Siddique, R. H., Gomard, G. & Hölscher, H. The role of random nanostructures for the omnidirectional anti-reflection properties of the glasswing butterfly. Nat. Commun. 6 , 6909 (2015)..
Stroganov, V. F. & Serova, V. N. Optical adhesives: analysis, achievements, and trends in development. Polym. Sci., Ser. D. 12 , 410–416 (2019)..
Westerman, C. R., McGill, B. C. & Wilker, J. J. Sustainably sourced components to generate high-strength adhesives. Nature 621 , 306–311 (2023)..
Jinkins, K.R. et al. Thermally switchable, crystallizable oil and silicone composite adhesives for skin-interfaced wearable devices. Sci. Adv. 8 , eabo0537 (2022)..
Pal, S. et al. Recyclable surgical, consumer, and industrial adhesives of poly (α-lipoic acid). Science 385 , 877–883 (2024)..
Ren, H. et al. Injectable, self-healing hydrogel adhesives with firm tissue adhesion and on-demand biodegradation for sutureless wound closure. Sci. Adv. 9 , eadh4327 (2023)..
Petrie, E. M. Handbook of Adhesives and Sealants , 2nd edn. (McGraw-Hill, 2007).
Savage, N. Optical adhesives. Nat. Photonics 3 , 418–419 (2009)..
Pahlevaninezhad, H. et al. Nano-optic endoscope for high-resolution optical coherence tomography in vivo. Nat. Photonics 12 , 540–547 (2018)..
Broder, J. D. & Forestieri, A. F. Improvements in Silicon Solar Cell Cover Glass Assembly and Packaging Using FEP Teflon (National Aeronautics and Space Administration, 1970).
Greenberg, S. A., McCargo, M. & Palmer, W. L. Investigation of FEP Teflon as a Cover for Silicon Solar Cells (Lockheed Missiles and Space Co., 1971).
Griebel, J. J. et al. New infrared transmitting material via inverse vulcanization of elemental sulfur to prepare high refractive index polymers. Adv. Mater. 26 , 3014–3018 (2014)..
Nishant, A. et al. High refractive index chalcogenide hybrid inorganic/organic polymers for integrated photonics. Adv. Optical Mater. 10 , 2200176 (2022)..
Gvishi, R., Pokrass, M. & Strum, G. Optical bonding with fast sol-gel. J. Eur. Optical Soc. Rapid 4 , 09026 (2009)..
Gvishi, R. Fast sol-gel technology: from fabrication to applications. J. Sol. Gel Sci. Technol. 50 , 241–253 (2009)..
Li, Y. F. et al. Optical bonding utilizing aqueous Al 2 O 3 -P 2 O 5 -lactate sol-gel adhesives. Ceram. Int. 50 , 33537–33545 (2024)..
Gvishi, R. et al. Optical waveguide fabrication using a fast sol-gel method. Optical Mater. 30 , 1755–1758 (2008)..
Kotov, L. et al. More than 100W, 18cm Yb-doped phosphate fiber amplifier. In Proceedings of SPIE 10897, Fiber Lasers XVI: Technology and Systems , 108970X (SPIE, 2019).
Cozic, S. et al. Splicing fluoride glass and silica optical fibers. EPJ Web. Conf. 215 , 04003 (2019)..
Xiao, L. M. et al. Fusion splicing photonic crystal fibers and conventional single-mode fibers: microhole collapse effect. J. Lightwave Technol. 25 , 3563–3574 (2007)..
Petersen, C. R. et al. Mid-infrared supercontinuum covering the 1.4-13.3 μm molecular fingerprint region using ultra-high NA chalcogenide step-index fibre. Nat. Photonics 8 , 830–834 (2014)..
Xie, Y. et al. Mid-infrared chalcogenide microfiber knot resonators. Photonics Res. 8 , 616–621 (2020)..
Flaschen, S. S., Pearson, A. D. & Northover, W. R. Low melting sulfide-halogen inorganic glasses. J. Appl. Phys. 31 , 219–220 (1960)..
Dronova, M. & Semencha, A. Water absorption and moisture resistance of As-S-Se-I glasses. Mater. Today. Proc. 30 , 456–461 (2020)..
Molla, A. R. et al. Synthesis and characterization of low T g As-S-I chalcohalide glass for processing of raw diamonds. Int. J. Appl. Glass Sci. 8 , 132–135 (2017)..
Markov, V. A. et al. Adhesive As-S-Se-I immersion lenses for enhancing radiation characteristics of mid-IR LEDs operating in wide temperature range. Infrared Phys. Technol. 78 , 167–172 (2016)..
Dronova, M. G. & Osipov, A. Influence of Se on properties of As-S-Se-I glass for immersion mid-IR leds lenses. Key Eng. Mater. 822 , 811–817 (2019)..
Clark, R. J. H. & Rippon, D. M. The vapor phase Raman spectra, Raman band contour analyses, Coriolis constants, force constants, and values for thermodynamic functions of the trihalides of group V. J. Mol. Spectrosc. 52 , 58–71 (1974)..
Kobliska, R. J. & Solin, S. A. Raman spectrum of vitreous As 2 S 3 . J. Non Crystalline Solids 8 , 191–195 (1972)..
Nims, C. et al. Low frequency Raman spectroscopy for micron-scale and in vivo c haracterization of elemental sulfur in microbial samples. Sci. Rep. 9 , 7971 (2019)..
Wuttig, M. et al. Revisiting the nature of chemical bonding in chalcogenides to explain and design their properties. Adv. Mater. 35 , 2208485 (2023)..
Snir, M. et al. Mechanical and optical properties of UV-curable modified acrylic adhesives. J. Adhes. 27 , 175–185 (1989)..
Adam, J. L. & Zhang, X. H. Chalcogenide Glasses: Preparation, Properties and Applications (Woodhead Publishing, 2014).
Oettinger, P. E. Liquid coatings to decrease laser-induced surface damage in proustite. Opt. Commun. 13 , 431–434 (1975)..
Zhong, M. H. et al. Low-loss chalcogenide fiber prepared by double peeled-off extrusion. J. Lightwave Technol. 38 , 4533–4539 (2020)..
0
Views
2
Downloads
0
CSCD
Publicity Resources
Related Articles
Related Author
Related Institution
京公网安备11010802024621