High-efficiency multi-scale holographic volumetric 3D printing with a phase light modulator

Maria Isabel Álvarez-Castaño; Riccardo Rizzo; Viola Sgarminato; Ye Pu; Christophe Moser

doi:10.1038/s41377-026-02331-4

Your Location：

Home >

Browse articles >

High-efficiency multi-scale holographic volumetric 3D printing with a phase light modulator

Original Articles

- High-efficiency multi-scale holographic volumetric 3D printing with a phase light modulator
- High-efficiency multi-scale holographic volumetric 3D printing with a phase light modulator
- Light: Science & Applications 2026年15卷第8期页码：2702-2719
- Affiliations：
  
  1.Laboratory of Applied Photonics Devices, School of Engineering, Ecole Polytechnique Fédérale de Lausanne, Lausanne CH-1015, Switzerland
  2.Present address: BIOINSIDE Lab, Department of Mechanical and Aerospace Engineering (DIMEAS), Politecnico di Torino, Turin 10129, Italy
- Author bio：
  
  Maria Isabel. Álvarez-Castaño (maria.alvarezcastano@epfl.ch)
  Christophe Moser (christophe.moser@epfl.ch)
- Funds：
- DOI：10.1038/s41377-026-02331-4
  中图分类号：
- 收稿：2025-08-25，
  
  修回：2026-04-01，
  
  录用：2026-04-22，
  
  网络首发：2026-05-19，
  
  纸质出版：2026-08-31
- Accepted：
Scan QR Code
Maria Isabel Álvarez-Castaño, Riccardo Rizzo, Viola Sgarminato, 等. High-efficiency multi-scale holographic volumetric 3D printing with a phase light modulator[J]. Light: Science & Applications, 2026,15(8):2702-2719.

Álvarez-Castaño, M. I. et al. High-efficiency multi-scale holographic volumetric 3D printing with a phase light modulator. Light: Science & Applications, 15, 2702-2719 (2026).
Maria Isabel Álvarez-Castaño, Riccardo Rizzo, Viola Sgarminato, 等. High-efficiency multi-scale holographic volumetric 3D printing with a phase light modulator[J]. Light: Science & Applications, 2026,15(8):2702-2719. DOI： 10.1038/s41377-026-02331-4.

Álvarez-Castaño, M. I. et al. High-efficiency multi-scale holographic volumetric 3D printing with a phase light modulator. Light: Science & Applications, 15, 2702-2719 (2026). DOI： 10.1038/s41377-026-02331-4.

摘要

Abstract

Light-based 3D printing with photocurable resins enables the rapid fabrication of complex structures with high resolution and fidelity. Tomographic Volumetric Additive Manufacturing (TVAM) employs a digital micromirror device (DMD) to project amplitude light patterns into rotating resin volumes

producing 3D geometries through photopolymerization. Typically

the light projection efficiency in such binary amplitude modulator-based systems is below a few percent. Recent advancements introduced phase encoding in TVAM using binary amplitude modulators and the Lee Hologram method

increasing axial control and boosting light efficiency to about 10%. In this work

we present the first 3D printing platform utilizing a phase light modulator (PLM)

based on an array of micro-electro-mechanical piston mirrors. Compared to amplitude encoding

phase encoding with the PLM yields a 70-fold increase in laser power efficiency. By coupling this efficient light engine with a speckle reduction method in holographic

volumetric additive manufacturing (HoloVAM)

we experimentally demonstrate printing 3D objects across different scales from hundreds of micrometers to centimeters and with various materials from acrylate-based resins to soft hydrogels

including cell-laden hydrogels with a concentration of 1 million cells per mL. Micro-CT revealed a

$$ \sim 30.3\

\mu {m} $$

as the smallest positive feature printed. Moreover

we introduce the use of gelatin Thiol/Norbornene as a material for printing with the Holographic VAM technique

which allows us to print large-scale objects (up to

$$ (3\

\times 3\times 4\

{{cm}}^{3}) $$

within 2 minutes using only a 150 mW laser diode. The PLM opens up new avenues in volumetric AM for holographic techniques using low-cost single-mode laser diodes.

关键词

Keywords

references

Bernal, P. N. et al. Volumetric Bioprinting of Complex Living-Tissue Constructs within Seconds. Adv. Mater. 31 , 1904209 (2019)..

Jamróz, W. et al. 3D Printing in Pharmaceutical and Medical Applications-Recent Achievements and Challenges. Pharm. Res. 35 , 176 (2018)..

Frazier, W. E. Metal Additive Manufacturing: A Review. J. Mater. Eng. Perform. 23 , 1917–1928 (2014)..

Kodama, H. Automatic method for fabricating a three-dimensional plastic model with photo-hardening polymer. Rev. Sci. Instrum. 52 , 1770–1773 (1981)..

Gibson, I., Rosen, D. & Stucker, B. Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing . (New York: Springer, 2015), https://doi.org/10.1007/978-1-4939-2113-3 https://doi.org/10.1007/978-1-4939-2113-3 ..

Wang, X. et al. 3D printing of polymer matrix composites: A review and prospective. Compos. Part B: Eng. 110 , 442–458 (2017)..

Bikas, H., Stavropoulos, P. & Chryssolouris, G. Additive manufacturing methods and modelling approaches: a critical review. Int. J. Adv. Manuf. Technol. 83 , 389–405 (2016)..

Hahn, V. et al. Rapid Assembly of Small Materials Building Blocks (Voxels) into Large Functional 3D Metamaterials. Adv. Funct. Mater. 30 , 1907795 (2020)..

Kelly, B. E. et al. Volumetric additive manufacturing via tomographic reconstruction. Science 363 , 1075–1079 (2019)..

Loterie, D., Delrot, P. & Moser, C. High-resolution tomographic volumetric additive manufacturing. Natature Commun. 11 , 852 (2020)..

Regehly, M. et al. Xolography for linear volumetric 3D printing. Nature 588 , 620–624 (2020)..

Hahn, V. et al. Light-sheet 3D microprinting via two-colour two-step absorption. Nat. Photonics 16 , 784–791 (2022)..

Álvarez-Castaño, M. I. et al. Holographic tomographic volumetric additive manufacturing. Natature Commun. 16 , 1551 (2025)..

Ren, Y.-X., Lu, R.-D. & Gong, L. Tailoring light with a digital micromirror device. ANNALEN DER PHYSIK 527 , 447–470 (2015)..

Correa-Rojas, N. A., Gallego-Ruiz, R. D. & Álvarez-Castaño, M. I. Generation of linearly polarized modes using a digital micromirror device and phase optimization. Computer Opt. 46 , 30 (2022)..

Otón, J. et al. Multipoint phase calibration for improved compensation of inherent wavefront distortion in parallel aligned liquid crystal on silicon displays. Appl. Opt. 46 , 5667 (2007)..

Haist, T. & Osten, W. Holography using pixelated spatial light modulators—part 1: theory and basic considerations. J. Micro/Nanolithogr., MEMS, MOEMS 14 , 041310 (2015)..

Wu, P.-C., Yang, S.-Y. & Lee, W. Recovery of UV-degraded electrical properties of nematic liquid crystals doped with TiO2 nanoparticles. J. Mol. Liq. 218 , 150–155 (2016)..

Yang, Q. et al. Fast-Response Liquid Crystal Phase Modulators with an Excellent Photostability. Crystals 10 , 765 (2020)..

Bartlett, T. A. , McDonald, B. C. & Hall, J. Adapting Texas Instruments DLP technology to demonstrate a phase spatial light modulator. Proceedings of the SPIE 10932, Emerging Digital Micromirror Device Based Systems and Applications Ⅺ. San Francisco, California, United States: SPIE, 2019, 109320S, https://doi.org/10.1117/12.2514483 https://doi.org/10.1117/12.2514483 .

Rocha, J. C. A. et al. Fast and light-efficient wavefront shaping with a MEMS phase-only light modulator. Opt. Express 32 , 43300–43314 (2024)..

Kilcullen, P. et al. High-speed complex field modulation using binary phase-engraved superpixels. Light.: Adv. Manuf. 6 , 17 (2025)..

Fuentes, J. L. M. et al. Interferometric method for phase calibration in liquid crystal spatial light modulators using a self-generated diffraction-grating. Opt. Express 24 , 14159–14171 (2016)..

Wechsler, F. et al. Wave optical model for tomographic volumetric additive manufacturing. Opt. Express 32 , 14705–14712 (2024)..

Haist, T., Schönleber, M. & Tiziani, H. J. Computer-generated holograms from 3D-objects written on twisted-nematic liquid crystal displays. Opt. Commun. 140 , 299–308 (1997)..

Madsen, A. G. & Glückstad, J. HoloTile: Rapid and speckle-suppressed digital holography by matched sub-hologram tiling and point spread function shaping. Opt. Commun. 525 , 128876 (2022)..

Choi, S. et al. Time-multiplexed Neural Holography: A flexible framework for holographic near-eye displays with fast heavily-quantized spatial light modulators. Proceedings of the ACM SIGGRAPH 2022 Conference Proceedings. Vancouver, BC, Canada: Association for Computing Machinery (2022, 32).

Goodman, J. W. Some fundamental properties of speckle. J. Optical Soc. Am. 66 , 1145–1150 (1976)..

Zhou, L. et al. Speckle-noise-reduction method of projecting interferometry fringes based on power spectrum density. Appl. Opt. 51 , 6974–6978 (2012)..

Restrepo, J., Correa-Rojas, N. & Herrera-Ramirez, J. Speckle Noise Reduction in Digital Holography Using a DMD and Multi-Hologram Resampling. Appl. Sci. 10 , 8277 (2020)..

Sgarminato, V. et al. 3D in vitro modeling of the exocrine pancreatic unit using tomographic volumetric bioprinting. Biofabrication 16 , 045034 (20 24)..

Boniface, A. et al. Volumetric helical additive manufacturing. Light.: Adv. Manuf. 4 , 124–132 (2023)..

Webber, D. et al. Micro-optics fabrication using blurred tomography. Optica 11 , 665–672 (2024)..

Zhang, Y. J. et al. Advancing Tomographic Volumetric Printing Via Oxygen Inhibition Control: Improved Accuracy and Large-Volume Capability. Adv. Mater. 37 , e08729. https://doi.org/10.1002/adma.202508729 (2025)..

Peng, Y. et al. Neural holography with camera-in-the-loop training. ACM Trans. Graph. 39 , 185 (2020)..

Campos, J. et al. Characterization of the Liquid Crystal Display Modulation. Optimization for Some Applications. Acta Phys. Polonica 101 , 189–200 (2002)..

Ambs, P. & Bigue, L. Characterization of an analog ferroelectric spatial light modulator: application to dynamic diffractive optical elements and optical information processing. Proceedings of the SPIE 10302, Optoelectronic Information Processing: Optics for Information Systems: A Critical Review. Valencia, Spain: SPIE, 2001, 103020I, https://doi.org/10.1117/12.449680 https://doi.org/10.1117/12.449680 .

Macfaden, A. J. & Wilkinson, T. D. Characterization, design, and optimization of a two-pass twisted nematic liquid crystal spatial light modulator system for arbitrary complex modulation. J. Optical Soc. Am. 34 , 161–170 (2017)..

Van Den Bulcke, A. I. et al. Structural and Rheological Properties of Methacrylamide Modified Gelatin Hydrogels. Biomacromolecules 1 , 31–38 (2000)..

Rizzo, R. et al. Multiscale Hybrid Fabrication: Volumetric Printing Meets Two-Photon Ablation. Adv. Mater. Technol. 8 , 2201871 (2023)..

Wolfram Research, Inc. Mathematica. (Wolfram Research, Inc, 2024).

The MathWorks Inc. MATLAB version: 25. x (R2025a). (2025).

浏览量

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Universal and transferable attacks on pathology foundation models using microscopic perturbations

High-efficiency and stable deep-blue iridium phosphorescent OLEDs with enhanced charge transfer dynamics

Surpassing kilometer-scale terahertz wireless communication beyond 300 GHz enabled by hybrid photonic–electronic synergy

Thermal Utilization on Chip

Local-nonlocal assisted multifunctional photonic crystals