1.State Key Laboratory of Integrated Optoelectronics, College of Electronic Science and Engineering, Jilin University, 2699 Qianjin Street, 130012 Changchun, China
2.State Key Laboratory of Precision Measurement Technology and Instruments, Department of Precision Instrument, Tsinghua University, Haidian, 100084 Beijing, China
Jing Feng (jingfeng@jlu.edu.cn)
Hong-Bo Sun(hbsun@tsinghua.edu.cn)
纸质出版日期:2018,
网络出版日期:2018-07-04,
收稿日期:2017-12-21,
修回日期:2018-05-12,
录用日期:2018-05-18
Scan QR Code
Mechanically robust stretchable organic optoelectronic devices built using a simple and universal stencil-pattern transferring technology[J]. LSA, 2018,7(4):262-269.
Yin, D. et al. Mechanically robust stretchable organic optoelectronic devices built using a simple and universal stencil-pattern transferring technology. Light: Science & Applications, 7, 262-269 (2018).
Mechanically robust stretchable organic optoelectronic devices built using a simple and universal stencil-pattern transferring technology[J]. LSA, 2018,7(4):262-269. DOI: 10.1038/s41377-018-0041-x.
Yin, D. et al. Mechanically robust stretchable organic optoelectronic devices built using a simple and universal stencil-pattern transferring technology. Light: Science & Applications, 7, 262-269 (2018). DOI: 10.1038/s41377-018-0041-x.
Stretchable electronic and optoelectronic devices based on controllable ordered buckling structures exhibit superior mechanical stability by retaining their buckling profile without distortion in repeated stretch-release cycles. However
a simple and universal technology to introduce ordered buckling structures into stretchable devices remains a real challenge. Here
a simple and general stencil-pattern transferring technology was applied to stretchable organic light-emitting devices (SOLEDs) and polymer solar cells (SPSCs) to realize an ordered buckling profile. To the best of our knowledge
both the SOLEDs and SPSCs with periodic buckles exhibited the highest mechanical robustness by operating with small performance variations after 20
000 and 12
000 stretch-release cycles between 0% and 20% tensile strain
respectively. Notably
in this work
periodic-buckled structures were introduced into SPSCs for the first time
with the number of stretch-release cycles for the SPSCs improved by two orders of magnitude compared to that for previously reported random-buckled stretchable organic solar cells. The simple method used in this work provides a universal solution for low-cost and high-performance stretchable electronic and optoelectronic devices and promotes the commercial development of stretchable devices in wearable electronics.
Bade, S. G. R. et al. Stretchable light-emitting diodes with organometal-halide-perovskite-polymer composite emitters.Adv. Mater.29, 1607053 (2017)..
Wang, J. X. et al. Extremely stretchable electroluminescent devices with ionic conductors.Adv. Mater.28, 4490–4496 (2016)..
Larson, C. et al. Highly stretchable electroluminescent skin for optical signaling and tactile sensing.Science351, 1071–1074 (2016)..
Liang, J. J., Li, L., Niu, X. F., Yu, Z. B.&Pei, Q. B. Elastomeric polymer light-emitting devices and displays.Nat. Photonics7, 817–824 (2013)..
Jeong, G. S. et al. Solderable and electroplatable flexible electronic circuit on a porous stretchable elastomer.Nat. Commun.3, 977 (2012)..
Hu, X. L. et al. Stretchable inorganic-semiconductor electronic systems.Adv. Mater.23, 2933–2936 (2011)..
Sekitani, T. et al. Stretchable active-matrix organic light-emitting diode display using printable elastic conductors.Nat. Mater.8, 494–499 (2009)..
Zhang, Z. T. et al. Stretchable polymer solar cell fibers.Small11, 675–680 (2015)..
O'Connor, T. F. et al. Stretching and conformal bonding of organic solar cells to hemispherical surfaces.Energy Environ. Sci.7, 370–378 (2014)..
Lipomi, D. J., Chong, H., Vosgueritchian, M., Mei, J. G.&Bao, Z. N. Toward mechanically robust and intrinsically stretchable organic solar cells: evolution of photovoltaic properties with tensile strain.Sol. Energy Mater. Sol. Cells107, 355–365 (2012)..
Lipomi, D. J., Tee, B. C. K., Vosgueritchian, M.&Bao, Z. N. Stretchable organic solar cells.Adv. Mater.23, 1771–1775 (2011)..
Luan, P. S. et al. Epidermal supercapacitor with high performance.Adv. Funct. Mater.26, 8178–8184 (2016)..
Choi, C. et al. Microscopically buckled and macroscopically coiled fibers for ultra-stretchable supercapacitors.Adv. Energy Mater.7, 1602021 (2017)..
Zhang, Q. C. et al. Stretchable fiber-shaped asymmetric supercapacitors with ultrahigh energy density.Nano Energy39, 219–228 (2017)..
Zhang, Z. T. et al. Nitrogen-doped core-sheath carbon nanotube array for highly stretchable supercapacitor.Adv. Energy Mater.7, 1601814 (2017)..
Zamarayeva, A. M. et al. Flexible and stretchable power sources for wearable electronics.Sci. Adv.3, e1602051 (2017)..
Kumar, R. et al. All-printed, stretchable Zn-Ag2O rechargeable battery via hyperelastic binder for self-powering wearable electronics.Adv. Energy Mater.7, 1602096 (2017)..
Li, H. S. et al. An all-stretchable-component sodium-ion full battery.Adv. Mater.29, 1700898 (2017)..
Wang, Y. et al. A highly stretchable, transparent, and conductive polymer.Sci. Adv.3, e1602076 (2017)..
Matsuhisa, N. et al. Printable elastic conductors by in situ formation of silver nanoparticles from silver flakes.Nat. Mater.16, 834–840 (2017)..
Cao, Y. et al. A transparent, self-healing, highly stretchable ionic conductor.Adv. Mater.29, 1605099 (2017)..
Jin, H. et al. Enhancing the performance of stretchable conductors for E-textiles by controlled ink permeation.Adv. Mater.29, 1605848 (2017)..
Liu, Z. Y. et al. High-adhesion stretchable electrodes based on nanopile interlocking.Adv. Mater.29, 1603382 (2017)..
Cai, Y. C. et al. Extraordinarily stretchable all-carbon collaborative nanoarchitectures for epidermal sensors.Adv. Mater.29, 1606411 (2017)..
Guo, S. Z., Qiu, K. Y., Meng, F. B., Park, S. H.&McAlpine, M. C. 3D printed stretchable tactile sensors.Adv. Mater.29, 1701218 (2017)..
Ho, M. D. et al. Percolating network of ultrathin gold nanowires and silver nanowires toward "invisible" wearable sensors for detecting emotional expression and apexcardiogram.Adv. Funct. Mater.27, 1700845 (2017)..
Yamamoto, Y. et al. Efficient skin temperature sensor and stable gel-less sticky ECG sensor for a wearable flexible healthcare patch.Adv. Healthc. Mater.6, 1700495 (2017)..
Kim, D. H.&Rogers, J. A. Stretchable electronics: materials strategies and devices.Adv. Mater.20, 4887–4892 (2008)..
Rogers, J. A., Someya, T.&Huang, Y. G. Materials and mechanics for stretchable electronics.Science327, 1603–1607 (2010)..
Lipomi, D. J.&Bao, Z. N. Stretchable, elastic materials and devices for solar energy conversion.Energy Environ. Sci.4, 3314–3328 (2011)..
Chortos, A., Liu, J.&Bao, Z. N. Pursuing prosthetic electronic skin.Nat. Mater.15, 937–950 (2016)..
Qian, Y. et al. Stretchable organic semiconductor devices.Adv. Mater.28, 9243–9265 (2016)..
Liu, W., Song, M. S., Kong, B.&Cui, Y. Flexible and stretchable energy storage: recent advances and future perspectives.Adv. Mater.29, 1603436 (2017)..
Kaltenbrunner, M. et al. Ultrathin and lightweight organic solar cells with high flexibility.Nat. Commun.3, 770 (2012)..
Kaltenbrunner, M. et al. An ultra-lightweight design for imperceptible plastic electronics.Nature499, 458–463 (2013)..
White, M. S. et al. Ultrathin, highly flexible and stretchable PLEDs.Nat. Photonics7, 811–816 (2013)..
Fukuda, K. et al. Fully-printed high-performance organic thin-film transistors and circuitry on one-micron-thick polymer films.Nat. Commun.5, 4147 (2014)..
Choi, M. K. et al. Wearable red-green-blue quantum dot light-emitting diode array using high-resolution intaglio transfer printing.Nat. Commun.6, 7149 (2015)..
Kaltenbrunner, M. et al. Flexible high power-per-weight perovskite solar cells with chromium oxide–metal contacts for improved stability in air.Nat. Mater.14, 1032–1039 (2015)..
Yin, D. et al. Two-dimensional stretchable organic light-emitting devices with high efficiency.ACS Appl. Mater. Interfaces8, 31166–31171 (2016)..
Yin, D. et al. Efficient and mechanically robust stretchable organic light-emitting devices by a laser-programmable buckling process.Nat. Commun.7, 11573 (2016)..
Yokota, T. et al. Ultraflexible organic photonic skin.Sci. Adv.2, e1501856 (2016)..
Ma, R., Feng, J., Yin, D.&Sun, H. B. Highly efficient and mechanically robust stretchable polymer solar cells with random buckling.Org. Electron.43, 77–81 (2017)..
Deshmukh, M. M., Ralph, D. C., Thomas, M.&Silcox, J. Nanofabrication using a stencil mask.Appl. Phys. Lett.75, 1631–1633 (1999)..
Brugger, J. et al. Resistless patterning of sub-micron structures by evaporation through nanostencils.Microelectron. Eng.53, 403–405 (2000)..
Kim, G. M., van den Boogaart, M. A. F.&Brugger, J. Fabrication and application of a full wafer size micro/nanostencil for multiple length-scale surface patterning.Microelectron. Eng.67-68, 609–614 (2003)..
Ye, Y. H., Jeong, D. Y.&Zhang, Q. M. Fabrication of strain tunable infrared frequency selective surfaceson electrostrictive poly(vinylidene fluoride–trifluoroethylene) copolymer films using a stencil mask method.Appl. Phys. Lett.85, 654–656 (2004)..
Lishchynska, M. et al. Predicting mask distortion, clogging and pattern transfer for stencil lithography.Microelectron. Eng.84, 42–53 (2007)..
Braam, K.&Subramanian, V. A stencil printed, high energy density silver oxide battery using a novel photopolymerizable poly(acrylic acid) separator.Adv. Mater.27, 689–694 (2015)..
Hyun, W. J. et al. Screen printing of highly loaded silver inks on plastic substrates using silicon stencils.ACS Appl. Mater. Interfaces7, 12619–12624 (2015)..
Liu, B. Q. et al. Extremely high-efficiency and ultrasimplified hybrid white organic light-emitting diodes exploiting double multifunctional blue emitting layers.Light Sci. Appl.5, e16137 (2016)..
Xu, L. H. et al. Microcavity-free broadband light outcoupling enhancement in flexible organic light-emitting diodes with nanostructured transparent metal-dielectric composite electrodes.ACS Nano10, 1625–1632 (2016)..
Liu, Y. F. et al. Highly flexible and efficient top-emitting organic light-emitting devices with ultrasmooth Ag anode.Opt. Lett.37, 1796–1798 (2012)..
Liu, Y. F. et al. Fabrication and characterization of Ag film with sub-nanometer surface roughness as a flexible cathode for inverted top-emitting organic light-emitting devices.Nanoscale5, 10811–10815 (2013)..
Guo, F. et al. The fabrication of color-tunable organic light-emitting diode displays via solution processing.Light Sci. Appl.6, e17094 (2017)..
Chen, Y. H. et al. Organic semiconductor heterojunctions: electrode-independent charge injectors for high-performance organic light-emitting diodes.Light Sci. Appl.5, e16042 (2016)..
Zou, J. Y., Li, C. Z., Chang, C. Y., Yip, H. L.&Jen, A. K. Interfacial engineering of ultrathin metal film transparent electrode for flexible organic photovoltaic cells.Adv. Mater.26, 3618–3623 (2014)..
Kang, H., Jung, S., Jeong, S., Kim, G.&Lee, K. Polymer-metal hybrid transparent electrodes for flexible electronics.Nat. Commun.6, 6503 (2015)..
Bi, Y. G. et al. Ultrathin and ultrasmooth Au films as transparent electrodes in ITO-free organic light-emitting devices.Nanoscale8, 10010–10015 (2016)..
Zhong, G. Y. et al. Strong piezoresistance effect of small molecule organic semiconductors.J. Phys. D Appl. Phys.41, 205106 (2008)..
Kim, J. H., Seo, S. M.&Lee, H. H. Nanovoid nature and compression effects in organic light emitting diode.Appl. Phys. Lett.90, 143521 (2007)..
Schulz, P. et al. NiOX/MoO3Bi-layers as efficient hole extraction contacts in organic solar cells.Adv. Funct. Mater.24, 701–706 (2014)..
Rafique, S., Abdullah, S. M., Shahid, M. M., Ansari, M. O.&Sulaiman, K. Significantly improved photovoltaic performance in polymer bulk heterojunction solar cells with graphene oxide/PEDOT: PSS double decked hole transport layer.Sci. Rep.7, 39555 (2017)..
0
浏览量
0
Downloads
1
CSCD
关联资源
相关文章
相关作者
相关机构
京公网安备11010802024621