1.Laboratory of Thin Film Optics, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800, China
2.Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing 100049, China Full list of author information is available at the end of the article
3.Hangzhou Institute for Advanced Study, University of Chinese Academy of Sciences, Hangzhou 310024, China
4.Key Laboratory of Materials for High Power Laser, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800, China
5.Department of Physics and Astronomy, University of New Mexico, Albuquerque, NM 87131, USA
6.CREOL, The College of Optics and Photonics, University of Central Florida, Orlando, FL 32816, USA
Meiping Zhu (bree@siom.ac.cn)
Wolfgang Rudolph (wrudolph@unm.edu)
Jianda Shao (jdshao@siom.ac.cn)
纸质出版日期:2020,
网络出版日期:2020-02-11,
收稿日期:2019-11-01,
修回日期:2020-01-13,
录用日期:2020-02-01
Scan QR Code
Nanolaminate-based design for UV laser mirror coatings[J]. LSA, 2020,9(1):12-17.
Zhu, M. P. et al. Nanolaminate-based design for UV laser mirror coatings. Light: Science & Applications, 9, 12–17 (2020).
Nanolaminate-based design for UV laser mirror coatings[J]. LSA, 2020,9(1):12-17. DOI: 10.1038/s41377-020-0257-4.
Zhu, M. P. et al. Nanolaminate-based design for UV laser mirror coatings. Light: Science & Applications, 9, 12–17 (2020). DOI: 10.1038/s41377-020-0257-4.
With ever-increasing laser power
the requirements for ultraviolet (UV) coatings increase continuously. The fundamental challenge for UV laser-resistant mirror coatings is to simultaneously exhibit a high reflectivity with a large bandwidth and high laser resistance. These characteristics are traditionally achieved by the deposition of laser-resistant layers on highly reflective layers. We propose a preflectivity and laser resistance in oneq design by using tunable nanolaminate layers that serve as an effective layer with a high refractive index and a large optical bandgap. An Al
2
O
3
-HfO
2
nanolaminate-based mirror coating for UV laser applications is experimentally demonstrated using e-beam deposition. The bandwidth
over which the reflectance is
>
99.5%
is more than twice that of a traditional mirror with a comparable overall thickness. The laser-induced damage threshold is increased by a factor of ~1.3 for 7.6 ns pulses at a wavelength of 355 nm. This tunable
nanolaminate-based new design strategy paves the way toward a new generation of UV coatings for high-power laser applications.
Macilwain, C. Inadequate optics 'threat to US laser facility'. Nature 403, 120 (2000).
Extreme light.Nat. Mater.15, 1 (2016)..
Fan, Z. W. et al. High beam quality 5 J, 200 Hz Nd:YAG laser system. Light Sci. Appl. 6, e17004 (2017).
Norvig, P. et al. 2020 visions. Nature 463, 26-32 (2010).
Malobabic, S., Jupé, M.&Ristau, D. Spatial separation effects in a guiding procedure in a modified ion-beam-sputtering process. Light.: Sci. Appl. 5, e16044 (2016).
Jauregui, C., Limpert, J.&Tünnermann, A. High-power fibre lasers. Nat. Photonics 7, 861-867 (2013).
Hu, C. Q. et al. New design for highly durable infrared-reflective coatings. Light Sci. Appl. 7, 17175 (2018).
Xing, H. B. et al. Improving laser damage resistance of 355 nm high-reflective coatings by co-evaporated interfaces. Opt. Lett. 41, 1253-1256 (2016).
Xu, L. et al. Improvement of the laser-induced damage threshold of oxide/fluoride double stack high reflective coatings at 355 nm by introducing interlayers. Appl. Surf. Sci. 280, 772-775 (2013).
Tolenis, T. et al. Next generation highly resistant mirrors featuring all-silica layers. Sci. Rep. 7, 10898 (2017).
Hausmann, D. et al. Rapid vapor deposition of highly conformal silica nanolaminates. Science 298, 402-406 (2002).
Zhong, L. J. et al. Nanolaminates of zirconia and silica using atomic layer deposition. Chem. Mater. 16, 1098-1103 (2004).
Peng, Q. et al. Bi-directional kirkendall effect in coaxial microtube nanolaminate assemblies fabricated by atomic layer deposition. ACS Nano 3, 546-554 (2009).
Wickberg, A. et al. Second-harmonic generation from ZnO/Al2O3nanolaminate optical metamaterials grown by atomic-layer deposition. Adv. Optical Mater. 4, 1203-1208 (2016)..
Willemsen, T. et al. Enhancement of the damage resistance of ultra-fast optics by novel design approaches. Opt. Express 25, 31948-31959 (2017).
Willemsen, T. et al. Tunable optical properties of amorphous Tantala layers in a quantizing structure. Opt. Lett. 42, 4502-4505 (2017).
Kim, L. H. et al. Al2O3/TiO2nanolaminate thin film encapsulation for organic thin film transistors via plasma-enhanced atomic layer deposition. ACS Appl. Mater. Interfaces 6, 6731-6738 (2014)..
Heuser, S. et al. 3D 3C-SiC/Graphene hybrid nanolaminate films for high-performance supercapacitors. Small 14, 1801857 (2018).
Kahouli, A. et al. Electrical characteristics and conduction mechanisms of amorphous subnanometric Al2O3-TiO2laminate dielectrics deposited by atomic layer deposition. Appl. Phys. Lett. 109, 202901 (2016)..
Cho, M. H. et al. Dielectric characteristics of Al2O3-HfO2nanolaminates on Si(100). Appl. Phys. Lett. 81, 1071-1073 (2002)..
Cheng, X. B. et al. Waterproof coatings for high-power laser cavities. Light Sci. Appl. 8, 12 (2019).
Xu, N. et al. Laser resistance dependence of interface for high-reflective coatings studied by capacitance-voltage and absorption measurement. Opt. Lett. 43, 4538-4541 (2018).
Chai, Y. J. et al. Laser-resistance sensitivity to substrate pit size of multilayer coatings. Sci. Rep. 6, 27076 (2016).
Cheng, X. B. et al. The effect of an electric field on the thermomechanical damage of nodular defects in dielectric multilayer coatings irradiated by nanosecond laser pulses. Light Sci. Appl. 2, e80 (2013).
Grilli, M. L. et al. Al2O3/SiO2and HfO2/SiO2dichroic mirrors for UV solid-state lasers. Thin Solid Films 517, 1731-1735 (2009)..
Tauc, J., Grigorovici, R.&Vancu, A. Optical properties and electronic structure of amorphous germanium. Phys. Status Solidi (B) 15, 627-637 (1966).
Krol, H. et al. Investigation of nanoprecursors threshold distribution in laser-damage testing. Opt. Commun. 256, 184-189 (2005).
Roshanzadeh, B., Boyd, S. T. P.&Rudolph, W. (Submitted for consideration).
0
浏览量
0
Downloads
0
CSCD
关联资源
相关文章
相关作者
相关机构
京公网安备11010802024621