2D materials for conducting holes from grain boundaries in perovskite solar cells

Peng You; Guanqi Tang; Jiupeng Cao; Dong Shen; Tsz-Wai Ng; Zafer Hawash; Naixiang Wang; Chun-Ki Liu; Wei Lu; Qidong Tai; Yabing Qi; Chun-Sing Lee; Feng Yan

doi:10.1038/s41377-021-00515-8

Go to Nature Website

Your Location：

Home >

Browse articles >

2D materials for conducting holes from grain boundaries in perovskite solar cells

Articles

- 2D materials for conducting holes from grain boundaries in perovskite solar cells
- 2D materials for conducting holes from grain boundaries in perovskite solar cells
- LSA 2021年10卷第4期页码：695-706
- Affiliations：
  
  1.Department of Applied Physics, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong, China
  2.College of New Materials and New Energies, Shenzhen Technology University, 518118, Shenzhen, China
  3.Center of Super-Diamond and Advanced Films (COSDAF), Department of Chemistry, City University of Hong Kong, Hong Kong, China
  4.Energy Materials and Surface Sciences Unit (EMSSU), Okinawa Institute of Science and Technology Graduate University (OIST), 1919-1 Tancha, Onna-son, Okinawa, 904-0495, Japan
  5.University Research Facility in Materials Characterization and Device Fabrication, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong, China
- Author bio：
  
  Feng Yan (apafyan@polyu.edu.hk)
- Funds：
- DOI：10.1038/s41377-021-00515-8
  中图分类号：
- 纸质出版日期：2021-04-30，
  
  网络出版日期：2021-03-31，
  
  收稿日期：2020-10-10，
  
  修回日期：2021-03-01，
  
  录用日期：2021-03-15
- Accepted：
Scan QR Code
2D materials for conducting holes from grain boundaries in perovskite solar cells[J]. LSA, 2021,10(4):695-706.

You, P. et al. 2D materials for conducting holes from grain boundaries in perovskite solar cells. Light: Science & Applications, 10, 695-706 (2021).
2D materials for conducting holes from grain boundaries in perovskite solar cells[J]. LSA, 2021,10(4):695-706. DOI： 10.1038/s41377-021-00515-8.

You, P. et al. 2D materials for conducting holes from grain boundaries in perovskite solar cells. Light: Science & Applications, 10, 695-706 (2021). DOI： 10.1038/s41377-021-00515-8.

摘要

Abstract

Grain boundaries in organic–inorganic halide perovskite solar cells (PSCs) have been found to be detrimental to the photovoltaic performance of devices. Here

we develop a unique approach to overcome this problem by modifying the edges of perovskite grain boundaries with flakes of high-mobility two-dimensional (2D) materials via a convenient solution process. A synergistic effect between the 2D flakes and perovskite grain boundaries is observed for the first time

which can significantly enhance the performance of PSCs. We find that the 2D flakes can conduct holes from the grain boundaries to the hole transport layers in PSCs

thereby making hole channels in the grain boundaries of the devices. Hence

2D flakes with high carrier mobilities and short distances to grain boundaries can induce a more pronounced performance enhancement of the devices. This work presents a cost-effective strategy for improving the performance of PSCs by using high-mobility 2D materials.

关键词

Keywords

references

Kojima, A. et al. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells.J. Am. Chem. Soc.131, 6050–6051 (2009)..

National Renewable Energy Laboratory (NREL).Best research-cell efficiency chart.https://www.nrel.gov/pv/cell-efficiency.htmlhttps://www.nrel.gov/pv/cell-efficiency.html. (2021).

Miyata, A. et al. Direct measurement of the exciton binding energy and effective masses for charge carriers in organic-inorganic tri-halide perovskites.Nat. Phys.11, 582–587 (2015)..

Xing, G. C. et al. Long-range balanced electron- and hole-transport lengths in organic-inorganic CH3NH3PbI3.Science342, 344–347 (2013)..

Stranks, S. D. et al. Electron-hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber.Science342, 341–344 (2013)..

Shi, D. et al. Low trap-state density and long carrier diffusion in organolead trihalide perovskite single crystals.Science347, 519–522 (2015)..

Tai, Q. D. et al. Efficient and stable perovskite solar cells prepared in ambient air irrespective of the humidity.Nat. Commun.7, 11105 (2016)..

Jeon, N. J. et al. Compositional engineering of perovskite materials for high-performance solar cells.Nature517, 476–480 (2015)..

Yang, W. S. et al. Iodide management in formamidinium-lead-halide-based perovskite layers for efficient solar cells.Science356, 1376–1379 (2017)..

Said, A. A., Xie, J.&Zhang, Q. C. Recent progress in organic electron transport materials in inverted perovskite solar cells.Small15, 1900854 (2019)..

Gu, P. Y. et al. An azaacene derivative as promising electron-transport layer for inverted perovskite solar cells.Chem. Asian J.11, 2135–2138 (2016)..

Seok, S. I., Grätzel, M.&Park, N. G. Methodologies toward highly efficient perovskite solar cells.Small14, 1704177 (2018)..

Zheng, X. P. et al. Defect passivation in hybrid perovskite solar cells using quaternary ammonium halide anions and cations.Nat. Energy2, 17102 (2017)..

Shao, Y. C. et al. Origin and elimination of photocurrent hysteresis by fullerene passivation in CH3NH3PbI3planar heterojunction solar cells.Nat. Commun.5, 5784 (2014)..

Xu, J. X. et al. Perovskite-fullerene hybrid materials suppress hysteresis in planar diodes.Nat. Commun.6, 7081 (2015)..

Bai, Y. et al. Enhancing stability and efficiency of perovskite solar cells with crosslinkable silane-functionalized and doped fullerene.Nat. Commun.7, 12806 (2016)..

Son, D. Y. et al. Self-formed grain boundary healing layer for highly efficient CH3NH3PbI3perovskite solar cells.Nat. Energy1, 16081 (2016)..

Liu, Z. K., Lau, S. P.&Yan, F. Functionalized graphene and other two-dimensional materials for photovoltaic devices: device design and processing.Chem. Soc. Rev.44, 5638–5679 (2015)..

Tang, G. Q. et al. Solution-phase epitaxial growth of perovskite films on 2D material flakes for high-performance solar cells.Adv. Mater.31, 1807689 (2019)..

You, P., Tang, G. Q.&Yan, F. Two-dimensional materials in perovskite solar cells.Mater. Today Energy11, 128–158 (2019)..

Wang, B. et al. The charge carrier dynamics, efficiency and stability of two-dimensional material-based perovskite solar cells.Chem. Soc. Rev.48, 4854–4891 (2019)..

Agresti, A. et al. Titanium-carbide MXenes for work function and interface engineering in perovskite solar cells.Nat. Mater.18, 1228–1234 (2019)..

Zhang, M. et al. Synergistic cascade carrier extraction via dual interfacial positioning of ambipolar black phosphorene for high-efficiency perovskite solar cells.Adv. Mater.32, 2000999 (2020)..

Wang, Y. et al. Photostability of MAPbI3perovskite solar cells by incorporating black phosphorus.Sol. RRL3, 1900197 (2019)..

Chen, W. et al. Black phosphorus quantum dots for hole extraction of typical planar hybrid perovskite solar cells.J. Phys. Chem. Lett.8, 591–598 (2017)..

Cao, J. P. et al. Enhanced performance of planar perovskite solar cells induced by van der waals epitaxial growth of mixed perovskite films on WS2flakes.Adv. Funct. Mater.30, 2002358 (2020)..

Yan, F., Migliorato, P.&Ishihara, R. Simulation of twin boundary effect on characteristics of single grain-silicon thin film transistors.Appl. Phys. Lett.91, 073509 (2007)..

Liu, H. et al. Semiconducting black phosphorus: synthesis, transport properties and electronic applications.Chem. Soc. Rev.44, 2732–2743 (2015)..

Long, G. et al. Achieving ultrahigh carrier mobility in two-dimensional hole gas of black phosphorus.Nano Lett.16, 7768–7773 (2016)..

Li, L. K. et al. Black phosphorus field-effect transistors.Nat. Nanotechnol.9, 372–377 (2014)..

Hao, C. X. et al. Flexible all-solid-state supercapacitors based on liquid-exfoliated black-phosphorus nanoflakes.Adv. Mater.28, 3194–3201 (2016)..

Chen, L. et al. Scalable clean exfoliation of high-quality few-layer black phosphorus for a flexible lithium ion battery.Adv. Mater.28, 510–517 (2016)..

Youngblood, N. et al. Waveguide-integrated black phosphorus photodetector with high responsivity and low dark current.Nat. Photonics9, 247–252 (2015)..

Huang, M. Q. et al. Broadband black-phosphorus photodetectors with high responsivity.Adv. Mater.28, 3481–3485 (2016)..

Lin, S. H. et al. Solution-processable ultrathin black phosphorus as an effective electron transport layer in organic photovoltaics.Adv. Funct. Mater.26, 864–871 (2016)..

Jeon, N. J. et al. Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells.Nat. Mater.13, 897–903 (2014)..

Bi, E. B. et al. Diffusion engineering of ions and charge carriers for stable efficient perovskite solar cells.Nat. Commun.8, 15330 (2017)..

You, P. et al. Efficient semitransparent perovskite solar cells with graphene electrodes.Adv. Mater.27, 3632–3638 (2015)..

Lin, P., Yan, F.&Chan, H. L. W. Improvement of the tunable wettability property of poly(3-alkylthiophene) films.Langmuir25, 7465–7470 (2009)..

Stone, H.A., Aziz, M. J.&Margetis, D. Grooving of a grain boundary by evaporation-condensation below the roughening transition.J. Appl. Phys.97, 113535 (2005)..

Yun, J. S. et al. Benefit of grain boundaries in organic-inorganic halide planar perovskite solar cells.J. Phys. Chem. Lett.6, 875–880 (2015)..

Tang, G. Q. et al. Performance enhancement of perovskite solar cells induced by lead acetate as an additive.Sol. RRL2, 1800066 (2018)..

Kim, H. S. et al. High efficiency solid-state sensitized solar cell-based on submicrometer rutile TiO2nanorod and CH3NH3PbI3perovskite sensitizer.Nano Lett.13, 2412–2417 (2013)..

Gonzalez-Pedro, V. et al. General working principles of CH3NH3PbX3Perovskite solar cells.Nano Lett.14, 888–893 (2014)..

Liu, J. et al. A dopant-free hole-transporting material for efficient and stable perovskite solar cells.Energy Environ. Sci.7, 2963–2967 (2014)..

Wang, Q. et al. Scaling behavior of moisture-induced grain degradation in polycrystalline hybrid perovskite thin films.Energy Environ. Sci.10, 516–522 (2017)..

Wang, F. et al. Phenylalkylamine passivation of organolead halide perovskites enabling high-efficiency and air-stable photovoltaic cells.Adv. Mater.28, 9986–9992 (2016)..

Ahn, N. et al. Trapped charge-driven degradation of perovskite solar cells.Nat. Commun.7, 13422 (2016)..

Han, Q. F. et al. Single crystal formamidinium lead iodide (FAPbI3): insight into the structural, optical, and electrical properties.Adv. Mater.28, 2253–2258 (2016)..

Sherkar, T. S. et al. Recombination in perovskite solar cells: significance of grain boundaries, interface traps, and defect ions.ACS Energy Lett.2, 1214–1222 (2017)..

Nicolosi, V. et al. Liquid exfoliation of layered materials.Science340, 1226419(2013)..

Loh, K. P. et al. Graphene oxide as a chemically tunable platform for optical applications.Nat. Chem.2, 1015–1024 (2010)..

Liu, S. H. et al. Black phosphorus quantum dots used for boosting light harvesting in organic photovoltaics.Angew. Chem. Int. Ed.56, 13717–13721 (2017)..

Wang, J. L. et al. High mobility MoS2transistor with low schottky barrier contact by using atomic thick h-BN as a tunneling layer.Adv. Mater.28, 8302–8308 (2016)..

Kadantsev, E. S.&Hawrylak, P. Electronic structure of a single MoS2monolayer.Solid State Commun.152, 909–913 (2012)..

Santos, E. J. G.&Kaxiras, E. Electrically driven tuning of the dielectric constant in MoS2layers.Acs Nano7, 10741–10746 (2013)..

Chang, H. X. et al. Thin film field-effect phototransistors from bandgap-tunable, solution-processed, few-layer reduced graphene oxide films.Adv. Mater.22, 4872–4876 (2010)..

You, P. et al. Ultrafast laser-annealing of perovskite films for efficient perovskite solar cells.Energy Environ. Sci.13, 1187–1196 (2020)..

Yin, W. J., Shi, T. T.&Yan, Y. F. Unusual defect physics in CH3NH3PbI3perovskite solar cell absorber.Appl. Phys. Lett.104, 063903 (2014)..

Guo, Y. G., Wang, Q.&Saidi, W. A. Structural stabilities and electronic properties of high-angle grain boundaries in perovskite cesium lead halides.J. Phys. Chem. C.121, 1715–1722 (2017)..

Walsh, A. et al. Self-regulation mechanism for charged point defects in hybrid halide perovskites.Angew. Chem. Int. Ed.54, 1791–1794 (2015)..

Zhang, Y. et al. Achieving reproducible and high-efficiency (>21%) perovskite solar cells with a presynthesized FAPbI3 powder.ACS Energy Lett.5, 360–366 (2020)..

Saidaminov, M. I. et al. High-quality bulk hybrid perovskite single crystals within minutes by inverse temperature crystallization.Nat. Commun.6, 7586 (2015)..

浏览量

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

暂无数据