A straightforward spectral emissivity estimating method based on constructing random rough surfaces

Zezhan Zhang; Mengchao Chen; Lichuan Zhang; Hongzu Li; Hairui Huang; Zilong Zhang; Peifeng Yu; Yi Niu; Shan Gao; Chao Wang; Jing Jiang

doi:10.1038/s41377-023-01312-1

Go to Nature Website

Your Location：

Home >

Browse articles >

A straightforward spectral emissivity estimating method based on constructing random rough surfaces

Original Articles

- A straightforward spectral emissivity estimating method based on constructing random rough surfaces
- A straightforward spectral emissivity estimating method based on constructing random rough surfaces
- LSA 2023年12卷第12期页码：2577-2588
- Affiliations：
  
  1.Clean Energy Materials and Engineering Center, School of Integrated Circuit Science and Engineering, University of Electronic Science and Technology of China, Chengdu, China
  2.College of Information and Communication Engineering, Harbin Engineering University, Harbin, China
  3.Department of Precision Instrument, Tsinghua University, Beijing, China
- Author bio：
  
  Yi Niu (niuyi@uestc.edu.cn)
  Shan Gao (gaoshan08@hrbeu.edu.cn)
  Jing Jiang (jiangj@uestc.edu.cn)
- Funds：
- DOI：10.1038/s41377-023-01312-1
  中图分类号：
- 纸质出版日期：2023-12-31，
  
  网络出版日期：2023-11-07，
  
  收稿日期：2023-06-08，
  
  修回日期：2023-10-05，
  
  录用日期：2023-10-21
- Accepted：
Scan QR Code
A straightforward spectral emissivity estimating method based on constructing random rough surfaces[J]. LSA, 2023,12(12):2577-2588.

Zhang, Z. Z. et al. A straightforward spectral emissivity estimating method based on constructing random rough surfaces. Light: Science & Applications, 12, 2577-2588 (2023).
A straightforward spectral emissivity estimating method based on constructing random rough surfaces[J]. LSA, 2023,12(12):2577-2588. DOI： 10.1038/s41377-023-01312-1.

Zhang, Z. Z. et al. A straightforward spectral emissivity estimating method based on constructing random rough surfaces. Light: Science & Applications, 12, 2577-2588 (2023). DOI： 10.1038/s41377-023-01312-1.

摘要

Abstract

Spectral emissivity is an essential and sensitive parameter to characterize the radiative capacity of the solid surface in scientific and engineering applications

which would be non-negligibly affected by surface morphology. However

there is a lack of assessment of the effect of roughness on emissivity and a straightforward method for estimating the emissivity of rough surfaces. This paper established an estimating method based on constructing random rough surfaces to predict rough surface (Geometric region) emissivity for metal solids. Based on this method

the emissivity of ideal gray and non-gray body surfaces was calculated and analyzed. The calculated and measured spectral emissivities of GH3044

K465

DD6

and TC4 alloys with different roughness were compared. The results show that the emissivity increases with the roughness degree

and the enhancement effect weakens with the increase of roughness or emissivity due to the existing limit (emissivity ε = 1.0). At the same time

the roughness would not change the overall spectral distribution characteristics but may attenuate the local features of the spectral emissivity. The estimated results are in good agreement with the experimental data for the above alloys' rough surfaces. This study provides a new reliable approach to obtaining the spectral emissivity of rough surfaces. This approach is especially beneficial for measuring objects in extreme environments where emissivity is difficult to obtain. Meanwhile

this study promotes an understanding of surface morphology's effect mechanism on emissivity.

关键词

Keywords

references

Xiao, Y. Z. et al. Nanosecond mid-infrared pulse generation via modulated thermal emissivity.Light Sci. Appl.8, 51 (2019)..

Inoue, T. et al. Realization of narrowband thermal emission with optical nanostructures.Optica.2, 27–35 (2015)..

Li, Z. L. et al. Satellite-derived land surface temperature: current status and perspectives.Remote Sens. Environ.131, 14–37 (2013)..

Kats, M. A. et al. Vanadium dioxide as a natural disordered metamaterial: perfect thermal emission and large broadband negative differential thermal emittance.Phys. Rev. X3, 041004 (2013)..

Kwak, H. et al. Non-destructive thickness characterisation of 3D multilayer semiconductor devices using optical spectral measurements and machine learning.Light Adv. Manuf.2, 9–19 (2021)..

Yu, K. et al. Multiband metamaterial emitters for infrared and laser compatible stealth with thermal management based on dissipative dielectrics.Photonics Res.11, 290–298 (2023)..

Zhao, Y. Z. et al. Multispectral radiometric temperature measurement algorithm for turbine blades based on moving narrow-band spectral windows.Opt. Express29, 4405–4421 (2021)..

Iuchi, T. Modeling of emissivities of metals and their behaviors during the growth of an oxide film.AIP Conf. Proc.684, 717–722 (2003)..

Liu, Z. K. et al. High-emissivity composite-oxide fillers for high temperature stable aluminum-chromium phosphate coating.Surf. Coat. Technol.349, 885–893 (2018)..

Pivovarník, M. et al. Improved temperature and emissivity separation algorithm for multispectral and hyperspectral sensors.IEEE Trans. Geosci. Remote Sens.55, 1944–1953 (2017)..

Wang, F. Y. et al. Effect of surface morphology and densification on the infrared emissivity of C/SiC composites.Appl. Surf. Sci.313, 670–676 (2014)..

Watanabe, H. et al. Spectral emissivity measurements.Exp. Methods Phys. Sci.46, 333–366 (2014)..

Zhang, K. H. et al. Effect of surface oxidation on emissivity properties of pure aluminum in the near infrared region.Mater. Res. Express4, 086501 (2017)..

Zhang, F. et al. Infrared spectral emissivity property of pure titanium in the 473-1035 K temperature range.Appl. Spectrosc.70, 1717–1725 (2016)..

Fu, T. R. et al. Measurements of the directional spectral emissivity based on a radiation heating source with alternating spectral distributions.Int. J. Heat. Mass Transf.90, 1207–1213 (2015)..

Del Campo, L., Pérez-Sáez, R. B.&Tello, M. J. Iron oxidation kinetics study by using infrared spectral emissivity measurements below 570 ℃.Corros. Sci.50, 194–199 (2008)..

Krishnan, S.&Nordine, P. C. Spectral emissivities in the visible and infrared of liquid Zr, Ni, and nickel‐based binary alloys.J. Appl. Phys.80, 1735–1742 (1996)..

Shi, D. H. et al. Effect of surface oxidization on the spectral emissivity of steel 304 at the elevated temperature in air.Infrared Phys. Technol.66, 6–12 (2014)..

González-Fernández, L. et al. Infrared normal spectral emissivity of Ti–6Al–4 V alloy in the 500–1150 K temperature range.J. Alloy. Compd.541, 144–149 (2012)..

Jo, H. et al. Spectral emissivity of oxidized and roughened metal surfaces.Int. J. Heat. Mass Transf.115, 1065–1071 (2017)..

Kim, J., Jang, C.&Song, T. H. Measurement of total hemispherical emissivity using vacuum guarded hot plate.J. Heat. Transf.134, 114501 (2012)..

Kong, B., Li, T.&Eri, Q. Normal spectral emissivity of GH536 (HastelloyX) in three surface conditions.Appl. Therm. Eng.113, 20–26 (2017)..

Setién-Fernández, I. et al. Spectral emissivity of copper and nickel in the mid-infrared range between 250 and 900 ℃.Int. J. Heat. Mass Transf.71, 549–554 (2014)..

Zhao, S. N. et al. The normal spectral emission characteristics of Ni-based alloys during oxidation at high temperatures.Int. J. Heat. Mass Transf.128, 378–391 (2019)..

Agababov, S. G. Effect of the roughness of the surface of a solid body on its radiation properties and methods for their experimental determination.High. Temp.6, 78–88 (1968)..

Agababov, S. G. Effect of secondary roughness on the emissive properties of solid bodies.Teplofiz. Vys. Temp.8, 220–222 (1970)..

Agababov, S. G. Effect of theroughness factor on radiation properties of solids.Teplofizika Vysok. Temp.8, 770–773 (1970)..

Wen, C. D.&Mudawar, I. Modeling the effects of surface roughness on the emissivity of aluminum alloys.Int. J. Heat. Mass Transf.49, 4279–4289 (2006)..

Jian, S. et al. Modified Kubelka's layer model for calculation of infrared properties of low emissivity coatings with optically-rough surface.Infrared Phys. Technol.83, 177–181 (2017)..

Lee, H. J., Bryson, A. C.&Zhang, Z. M. Measurement and modeling of the emittance of silicon wafers with anisotropic roughness.Int. J. Thermophys.28, 918–933 (2007)..

Yu, K. et al. Normal spectral emissivity characteristics of roughened cobalt and improved emissivity model based on Agababov roughness function.Appl. Therm. Eng.159, 113957 (2019)..

Agababov, S. G. Effect of the roughness factor on radiation properties of solids (experimental check).Teplofizika Vysok. temperatur8, 770–773 (1970)..

Agababov, S.&Eksler, L. Influence of the geometric characteristics of the relief of the surface of a solid on its radiation properties (determination of the roughness factor). I. Theory.Teplofizika Vysok. temperatur9, 522–526 (1971)..

Rohsenow, W. M., Hartnett, J. P.&Ganic, E. N.Handbook of heat transfer applications(2nd edition). (McGraw-Hill Book Co., New York, NY, 1985).

Garcia, N.&Stoll, E. Monte carlo calculation for electromagnetic-wave scattering from random rough surfaces.Phys. Rev. Lett.52, 1798–1801 (1984)..

Bergström, D., Powell, J.&Kaplan, A. F. H. The absorption of light by rough metal surfaces: a three-dimensional ray-tracing analysis.J. Appl. Phys.103, 103515 (2008)..

Xu, Y. F. et al. Temperature-dependent emissivity models of aeronautical alloy DD6 and modified function for emissivity computation with different roughness.Int. J. Thermophys.42, 7 (2021)..

Yu, K. et al. Spectral emissivity of type E235B low carbon structural steel with different roughnesses.Opt. Rev.24, 540–548 (2017)..

Wang, F. et al. Effect of surface microstructures on the infrared emissivity of graphite.Int. J. Thermophys.35, 62–75 (2014)..

浏览量

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

暂无数据